The primary component of BlueMagic is Hypochlorous Acid (HOCL), the most effective element of chlorine. BlueMagic is pH neutral, super-oxidized water generated by electrolysis of a dilute salt solution passing through an electrolytic cell. This process creates large volumes of a gentle but extremely potent antimicrobial solution capable of rapid reduction of bacteria, viruses, spores, cysts, scale and biofilm. BlueMagic is stable, cost-effective to produce, greener than traditional chemical technologies, and can be used in multiple applications across a wide variety of industries.

BlueMagic is an oxidizing agent due to a mixture of free radicals, giving it an antimicrobial effect. Studies have shown that BlueMagic is highly biocidal and can substantially reduce pathogens such as Salmonella and E. coli without the use of hazardous toxic chemicals. In addition, it offers the added benefits of being able to remove biofilm and scale from manufacturing equipment, thus, greatly minimizing a major contributor to contamination problems.

Because BlueMagic is an activated, not a chemical oxidizing agent, microorganisms cannot build up resistance to BlueMagic as they can to other sanitizers and disinfectants. Standard toxic chemicals can create strains of pathogens that become resistant over time, because the cell can expel or neutralize the chemical before it can kill it, thereby causing the overall efficacy of chemical cleaners and disinfectants to be significantly reduced.

Numerous applications have been identified in agricultural, horticultural, food processing and retail grocery venues where the produce, poultry, meat, seafood and dairy industries are particularly impacted. BlueMagic can be safely applied to food products, equipment and facilities using a variety of methods, including fogging, direct application on or dosing into a contaminated medium.

CWG devices

Our devices are designed to produce BlueMagic on site for usage in various applications where there is a need for water purification, disinfecting and sterilization.

All devices have an EPA (Environment Protecting Agency) establishment number. Our devices meet all labeling requirements and we pay close attention to all the FIFRA (Federal Insecticide Fungicide and Rodenticide Act) requirements as to be fully compliant. No product is produced from our device for storage or later use as per regulations.

Basically the devices, using electric current 208-240 volt, produce Hypochlorous Ions on site on demand, which kill bacteria, mold, mildew, viruses and surface filling algae. The devices use sodium chloride (table salt) in a liquid format in water and an electric charge to generate HOCL on demand. HOCL does the killing of the life forms. When the electric charge has been turned off the devices produce no HOCL and have no residual in it.

Our devices do not require a hazardous use permit whereas chlorine (commercial available hypochlorite) in bottles must be permitted for filling, transportation or storage.

Electrolytic Flow Cells

CWG’s Electrolytic Flow Cells provide for safe and effective control of pathogens, when used as directed applying a rectified AC current voltage.

All components are produced within the US and supplied under manufacturers’ warranty: No leakages at 45psi pressure, no leaching of heavy metals into the disinfecting liquid and an extreme long lifetime of electrodes and membrane are guaranteed.

Electrolytic Flow Cells should be returned to and reconditioned by CWG after approximately 1 year of service in order to guarantee the disinfecting properties. An Electric Flow Cell can be reconditioned up to 5 times.